Talk:Develop Your Dungeon and Clutter
The first part of this page needs a total rework. Making a single room is nothing to a full cavern. Especially when you now need "CN" which makes little sense to new modders. (CN is for the hall) Then you get to the second room.
A listing of good things to use for the cave wouldn't hurt here. You can also meantion the fact that while for room everything needs to be at Z position of 0, however when the CNhall is place, you have to raise the position of the hall pieces to around 64 for it to even look good. Kinglink 20:05, 26 March 2006 (EST)
Help
Please could you add a list of the dungeon part names so we can build our dungeon, I couldn't find the parts for tut image 7
I agree
While this is my first crack at elder scrolls modding, I've modded extensively with the NWN toolset and wow I was like "OK got that first room done" and seeing the next step was like "Aw crap, oh well I'll just play the original campaign for awhile."
Playing the guessing game of deciphering which block to drop into the world is going to be a headache without some kind of preview pane or a key as to which pieces fit into which other pieces well.
(Also--Yes, had to figure out to either manually set the Z-value for the piece at 0.0 or just copy+paste the same value into every tile before attempting to line up or you'll be pulling your hair out)
I feel the power of the toolset and all its possibilities but definately need a stronger crutch to get started. Thanx
Don't Give Up!
The slowest and most frustrating part of working with any kit is learning it. While I agree that having to manually get everything on the same Z-plane is annoying (manual entry is a fine way to do this), it sounds like the main obstacle here is not understanding the cryptic names on the pieces. Stick with it, pull pieces out and play with them, and look at existing dungeons and tear them apart to see how we built them. Whenever I start working with a new kit I spend a few hours just doing this sort of experimentation to get inside the head of the artist who built them.
Once you get comfortable with the kit, you'll fly through laying out dungeons from scratch and get to focus on the fun stuff. JBurgess
Key:
Seeing that some people appear to be getting confused (I know I was), I've looked over the entire cave set, and fiddled with it a bit, to come up with this key:
C = Cave, N = Narrow, Rm = Room, S = Small, W = Wide, Trans = Transition Piece
So, for example CSRm = Cave Small Room, CWHall = Cave Wide Hall Etc...
Hope this helps some people. I've also managed to recreate the entire dungeon, and will come up with an edited picture at some point to name all the pieces. - Ephialtes
Perhaps that should be added on the article itself? I know I figured it out, but it would have been nice to have had that earlier. --Zonr 0 20:04, 3 April 2006 (EDT)
Any chance the picture with the cave set pieces listed is available? I have looked over all the pieces in the set and can't for the life of me fine the right ones for the section after the first bit of hallway. It is a good idea to expect people to spend some time getting familiar with the pieces in the set, but some hints and suggestions would keep this from becoming an exasperating experience. What about just listing the prefixes - such as CRmWall - as a hint, and then we can work out which pieces to put together from that subset. I am ready to give up on the whole thing, which isn't making for a very good learning process for me. --Guilded Lily 15:25, 23 April 2006 (EDT)
Need to crawl before you can walk
Thanks to the key posted, and some ripping apart other dungeons I was able to reconstruct something similar to what the map looks like (I think it matches up perfectly but not 100% sure). However it took my for ever! I had fun doing it (because I am a nerd with way to much time on his hands), but I can see how a lot of people will be turned off by this.
Give us the name of every single object used here, like in the room explanation. We can figure out the rest at a later time. When doing a tutorial, I for one want to know EXACTLY what I am doing, so if I screw up I know where and how. Exploration can be done at a later time. And thanks for the tutorial all and all very helpful.
UPDATE: I think I got the tutorial map exactly the way it should be. It is actually very easy. Just a little overwhelming at first. Just think how you would name every object if you were an artist and it becomes very easy. A detailed listed of every object is not needed, so discard my first request.
Just look at it like this, you have the prefix which represents the room. ex CS would be 'cave small' CRm would be 'cave room' ect. Then the tile name 'hall, floor, corner, ect'. Then a number representing the variations of art for that tile. Then A-D each letter rotates the tile 90 degrees.
So if you had CWHall01A it would mean it was a 'cave wide' (room), Hall, 01 (which is the first art variation of the hall), then A which is its direction. CWHall02B would be cave wide, hall, 02 (second art variation), B (rotated 90 degrees.
It actually very EASY so don't give up! --Fathead 02:17, 8 April 2006 (EDT)
Not Too Bad
I actually just jumped right into it without going through the tutorial very much. I learned enough to know that the pieces can't be rotated and they're classified so that they work together.
I see a lot of talk about manually setting the Z value, but I never had to do that. I just turn on grid snapping and go to town. But I definitely have to do a lot of adjusting to get pieces where I want, so perhaps I'm just doing it the long way...
--Tadrith
This is too time consuming..
This is to whoever did this tutorial. Everything is good about it up to this part. You expect us to sit down for hours and work out the puzzle? I cant even work out how to start of with the next CN piece. All's I know its a corner. Could you not list them all since you bothered making the entire cave? Tutorials shouldnt make someone work this hard. The entire point is to help you figure things out. THis is making us figure things out. Fill up the gap! The only way you can learn now is to look at other caves premade in the game.. Not too happy.--Xervish 06:41, 14 April 2006 (EDT)
Sorry you're having trouble. I added a note to the tutorial explaining myself, but I want to make a note of it here, too. In short, I do expect you to sit down for hours and work it out, otherwise I may as well upload the finished plugin and let folks download it without doing it themselves. The intention of this tutorial is to equip you with the basics to create a dungeon from start to finish in the CS; it's not a tutorial on how to use the cave kit. It's hard work, it takes patience, and there's not a way around that. Use the naming key that another user was kind enough to post, and yeah, certainly look at how other dungeons in the game were constructed; that's a great way to learn. Most of all - Stick with it. JBurgess 10:23, 14 April 2006 (EDT)
(Moved continued discussion to Xervish Talk Page) JBurgess 06:12, 17 April 2006 (EDT)
It works for me
I think this method to teach the editor works really well. At first it was really slow, but I was moving along at a fast clip by the end. I don't think it would help the learning process
And about having to manually edit every z coordinate... Are you crazy? Just turn on snapping, and hold down the z key to move the item along the z axis. The tutorial explained those steps. Maneuvering pieces isn't the hard part, finding the right one is.
It only took me about an hour to get the cave finished to look like the screenshot, and I think it's perfect, except for one piece. At the top right, with the CW pieces, there was one that I couldn't find. There's the passageway up that's needed, but I only have an "A" version of the piece, where a "C" was needed. Are the other 3 rotations of it accidentally left out, or is it possible to rotate this piece?
Anyways, thanks for the great tutorial JBurgess. Now off to make an Ayleid maze ruin.
--Raucanum
Needing help
I made the first room, and im thinking that the next part is too hard for me to make by myself. I dont know what pieces to put in. Perhaps the tutorial should include mose of the dungeon too. Because making one room is easy with help, but its just about impossible to make most of a dungeon without any help
- Read previous comments on this same page; this issue has been addressed JBurgess 01:34, 3 May 2006 (EDT)
previewing pieces
Is there any way to preview pieces before placing them to render window?... this picture in the page IS BIG Puzzle(i like puzzles)..
Why? If you don't like how the piece looks, you can simply undo the move. Furthermore, there is usually an abbrieveation to tell you how the piece will look (N means narrow, R means room, etc...) The Imperial Dragon 14:20, 22 August 2006 (EDT)
more pieces
This mighty not be right place ask but i will ask anyway are there more CAVE pieces or how I to make my own pieces?
You'll need a 3d modelling program or an exterior modder's resource if you want additional pieces. The Imperial Dragon 15:25, 22 August 2006 (EDT)
scaling
Found first right piece(CNCorner01A -> CNRampLong01A) its not fitting? how much i should scale it in order it to fit to place.. just found out that its not needet scale it. It just have to be in right z, then it will fit.
I made it
Finaly its done took 20 hours (figure how to it) and lots of milk (yes i drink milk). Now i can move to next part placing those *EVIL* traps + (some other not so evil thinks).
Good job sticking with it, and good luck with the traps and future endeavors. May wayward adventurers fear you nefarious machinations. JBurgess 00:03, 5 October 2006 (EDT)
How do I adjust the fade rate?
When I zoom out, the parts of the cave dissapear. I would like to zoom out further, but can't see the cave. Is it possible to adjust this so I can zoom further. Considering the picture shows the whole cave, I assume so. Dylnuge 22:14, 5 October 2006 (EDT)
- Go to File->Preferences (or click the button next to the Save button on the toolbar). Under the Render Window tab, move the slider bar for Clipping Distance farther to the right. Scruggs 22:59, 5 October 2006 (EDT)
Thanks. What is the final piece supposed to be (on the very far right)? Is it one of the cave in pieces? I can't see it well and don't know if it is an end or just unfinished or what.