Category talk:Scripting

Script Limit

Is there a limit to the number of lines a script can contain? I'm currently editing a script with about 52 lines (including debug code to later be stripped), and the CS refuses to save changes beyond a certain point. If I click on the save button, and then try to edit the script editor, I get the "do you want to save this script" message; if I say "yes", it just returns me to the editor. If I say "no", it closes the editor but the changes are not saved.

It _appears_ that if I put any function below line 39, it causes a problem (endifs and ENDS are fine). Perhaps I'm just doing something wrong? Eallman 16:20, 4 April 2006 (EDT)

Dragoon Wraith TALK 21:02, 29 June 2006 (EDT): There is a limit. It's quite large for regular scripts, but result scripts it's only 1024 characters.

Dragoon Wraith TALK 16:44, 4 July 2006 (EDT): I have a script that hit the limit, which appears to be character-based rather than line-based. After hitting the limit, I copied it into Word and ran a Word Count, and here's what I got:

Pages                                 24
Words                              4,521
Characters (no spaces)            25,667
Characters (with spaces)          31,472
Paragraphs                           649
Lines                              1,296

I'm not sure which version of "characters" we should be looking at, but because I wasn't able to complete the line I was on, it definitely is character based.

ShadowDancer 20:57, 4 July 2006 (EDT): I wonder if its Characters (with spaces)? It seems to me that this number is close to 32,767 and might be a memory limit maybe with filesize overhead?

Scruggs 19:30, 10 July 2006 (EDT) I would think it would be a limit of the compiled script, not the actual text, but i can't say that for sure. If you want to reduce the size of a script, though, you can transfer some of your if blocks into quest stages or dialog topics, setting up the conditions to do the work for you. Then just call setStage or Say to run the conditions. Say is useful when you need the results to run on the calling actor, which setStage won't allow.

ShadowDancer 09:12, 11 July 2006 (EDT): K, I have the actual answer. The limit is 32767 and its the number of characters including special characters i.e. the enter key. If you add the number of lines to the number of characters (with spaces), you end up with 32,768 and since there isn't a return after the last line, thats one less return which results in 32,767. It is probably just an artificial limit in the base programming (probably visual basic) creating the scriptedit box.

Dragoon Wraith TALK 19:58, 10 July 2006 (EDT): I actually do have ways around it, but since I'm not sure how that would work... how would you use Say?

Scruggs 21:13, 10 July 2006 (EDT) Each dialog topic can have multiple responses, with each response having a different set of conditions. When you call Say, the calling actor picks the response(s) in that topic for which he passes the conditions, and runs the result script on himself. There is no text and no voice associated with the responses. A simple (and stupid) example: you created a spell that kills the target, if he belongs to any of the five joinable factions. You could either add a separate if-elseif to your script for each faction, or you could set up a topic with 5 responses filtered for each of the guilds. So the first response's condition would be getInFaction magesGuild == 1.00 and it's results would be kill. Calling Say myTopic from your script turns several lines of code into just one line.

Obviously, it's not a huge benefit when you're only testing for five conditions, but if you're approaching the limit for script length it could be very useful. I'm still trying to figure out if NPCs will say all of the responses within that topic for which they pass the conditions, or just the first one that matches. If they only speak one response, you could most likely chain them up by calling Say again in the results field. That would let you check for all conditions (such as checking for all factions to which a NPC might belong, instead of just one).

This, along with quest stage results for conditions/results that don't need to run on a specific target, is making the scripting for Oblivion Unscripted much easier, since I do a lot of randomly-generated stuff. It also makes it easier to add new conditions or change things around, without having to restructure your script. And it makes long scripts more compact and easier to read. I thought it might be useful to you given the size of your scripts.

If / Elseif / Else explanation

Later: obviously not the case, since I just found a Beth script with about 150 lines.

Well, very strange. Apparently the problem was that I was passing an elseif without a specific parameter:

if var==1
   somecode here

      else if
         someothercode here

This SHOULD be a legal structure, and the compiler didn't seem to dislike it. BUt as soon as I changed it to

if var==1
....
  elseif var!=1

my saveprob disappeared. Now to debug the script itself, instead of the CS <G> Eallman 16:44, 4 April 2006 (EDT)

That's because else if implies some other condition. Try else instead of else if.--Tegid 12:51, 4 April 2006 (EDT)

if and elseif require conditions:

if (condition)
    effect
elseif (condition)
    effect
else
    effect
endif

Note the presence of the condition for both if and elseif; this is mandatory, and if it's omitted and still compiles, that's a compiler bug. (By the way, use four tildes to sign: ~~~~.) —Simetrical (talk • contribs) 21:13, 4 April 2006 (EDT)

DO'H! I'm forgetting by basic programming skills <G> Oddly, though, the compiler doesn't complain about this- the script just won't run <G> Acutally, there are a number of errors the compiler doesn't catch- I just found a typo where I'd substituted "77" for logical "&&", and nary a peep.

EA

ModAV and Negative Values

But now I've run into another problem. I'm trying to build a script that will allow an item to give a scalar skill boost while it's in inventory based on the player's base skill (You get less benefit the higher your base skill is). Apparently, you can use PLayer.modav with a POSITIVE variable (player.modav var), but you can't decrement the same way (player.modav -var), at least I've found no syntax that the compiler will accept to do this- (I need to do this to "reset" the skill to its regular level). Am I correct in assuming this is a missing feature in the compiler, or am I doing something stupid again?

EA

Tegid 14:48, 6 April 2006 (EDT): Read the ModAV page again. From my understanding you merely need to set player.modav back to 0 to remove the effect. If that doesn't help, you can always use GetAV and SetAV to do temporary modifications.

Eallman 16:48, 6 April 2006 (EDT)

(thanks for the sig tip) Not according to the page:

"If you use ModActorValue in a script, the Script Modifier is adjusted, and ONLY a script can adjust it back. In other words, if you have a script do

player.modav health 100

you are also responsible for doing

player.modav health -100 ".

So, you need to SPECIFICALLY reduce the mod by an equal amount, BUT the compiler apprently won't accept a negative variable as a parameter, only a positive one.

The problem is constructing the script in sucha way that you gon't get a looped reference from player.getav. Working on it.

Eallman 18:19, 6 April 2006 (EDT)

Found it! To use a negative variable for PLayer.modav, you have to first set ANOTHER variable to the negative value you want to use:

var2= -var1 PLayer.modav var2

very Byzantine, but it does indeed work

Dragoon Wraith TALK 21:02, 29 June 2006 (EDT): You don't need to set a separate variable - you just can't use the negative sign in the function's argument (any more than you can use any other mathematical expression), you have to set it to the negative separately:

modav var
set var to -var
modav var

Would increase and then decrease by the same amount.

A bit off from the original topic: I don't have any problem using player.modav strength -2 eg in a script... a problem occurs in the console window though. Try using ModPCAttribute instead, I don't have any problems with this at all. Or if you want the effect to hit an actor: ModActorValue

Are Script Blocks Atomic

--Tegid 15:19, 12 April 2006 (EDT) When I start executing a script on a particular object, is it guaranteed to finish with the block it is in before being interrupted by another script, or is there no such guarantee?

Eallman 18:50, 14 April 2006 (EDT)

Not even sure how you'd test this, without running a lOT of meesgae blocks by <G>. My initial reaction would be that this would be the case UNLESS you called another script from within the block, but that's gut feeling based on nothing in particular. If you called another script, it would surely intercept the rest of the block, and i'm nt _sure_ it would return correctly.

--Tegid 19:21, 14 April 2006 (EDT):How exactly would you call another script? You mean an Activate call? That just sets a flag to let the script parser know that the next time it runs through that objects script, it should run the activate block. See talk:Activate for details.